Rivets / Brass for a splinted tasses/greaves/arms

Making, Pictures, Queries, Resources

Moderator: Moderators

User avatar
I Am Actually A Hero
Posts: 14
Joined: Mon Jun 25, 2012 12:24 pm
Location: Zummerset

Rivets / Brass for a splinted tasses/greaves/arms

Postby I Am Actually A Hero » Thu Jan 23, 2014 6:12 pm

Dear All,

I have spent a fair amount of time on Google trying to locate brass rivets suitable for attaching 16ga high carbon steel to 4mm hide. Why brass? I prefer the look of brass to steel.
However, despite the power of t'interweb, I have drawn a blank.

Can anyone point me in the direction of a supplier of solid round head rivets - I think I need 3/8" dia shaft by 1/4" long ones. I need around 200.

If anyone is more knowlegable about these things than me (not difficult) feel free to enlighten me to the correct sizers I actually need! :crazy:

Many thanks
K



User avatar
Merlon.
Post Centurion
Posts: 598
Joined: Sat Jan 26, 2008 7:31 pm
Location: under a pile of cables in a server room

Re: Rivets / Brass for a splinted tasses/greaves/arms

Postby Merlon. » Thu Jan 23, 2014 7:06 pm

Try http://www.sapphireproducts.co.uk/solid.htm
I don't do armour - not my period - but your sizes seem completely wrong.
1/4" rivets are not long enough they would barely go through the leather and steel.
Look at the diagrams on the website to make sure you understand the sizing.
Make sure you are sitting down when you work out the price...



User avatar
The Iron Dwarf
Post Knight
Posts: 1335
Joined: Tue Mar 25, 2008 8:05 pm
Location: Northants

Re: Rivets / Brass for a splinted tasses/greaves/arms

Postby The Iron Dwarf » Thu Jan 23, 2014 11:04 pm

have lots of odd rivets in several metals inc brass, 3/8 diameter I think is too big, 3/16 is probably more like it.
I have some round head and lots of small flat head.

3/8 rivets would have a head diameter of just under 3/4"



Mark Griffin
Absolute Wizard
Posts: 4240
Joined: Wed Jul 20, 2005 2:28 pm
Location: Wales. Only just!
Contact:

Re: Rivets / Brass for a splinted tasses/greaves/arms

Postby Mark Griffin » Sun Feb 09, 2014 12:31 am

Haven't looked at your sizes but no self respecting medieval armourer would have ever used brass where it mattered. Indeed there are specific ordinances against it. Any brass ones you see will be later replacements or brass capped steel ones that were orginally gilded or in some later, post 16th cent armourers, there for decoration. And even those may have been gilded but I haven't seen info on the ones I'm thinking of.


http://www.griffinhistorical.com. A delicious decadent historical trifle. Thick performance jelly topped with lashings of imaginative creamy custard. You may also get a soggy event management sponge finger but it won't cost you hundreds and thousands.


Return to “Costumes”

Who is online

Users browsing this forum: No registered users and 2 guests