Medieval abrasives

Historic questions, thoughts and other interesting stuff

Moderator: Moderators

Post Reply
User avatar
RottenCad
Posts: 181
Joined: Tue Jul 18, 2006 11:50 am
Location: The M9. Or the A8. Or the M90. Or ...
Contact:

Medieval abrasives

Post by RottenCad »

No, not the hessian underthings!

I'm trying to find out about rottenstone, pumice and sandstone use as abrasives for woodworking. I've got a couple of tenuous leads, but would be grateful if anyone already has any information they would care to share.

Many thanks,

Cad
In a democracy, it's your vote that counts; in feudalism, it's your Count that votes ...

Rottencad
Ordinary Member, The Company Of St Margaret
http://www.cosm.org.uk

User avatar
robin wood
Posts: 113
Joined: Mon Sep 17, 2007 5:07 pm
Location: edale, peak district
Contact:

Post by robin wood »

I don't have clear evidence of abrasive use in woodworking before grinling gibbons in the 18th C. There is lots of evidence for lack of abrasive use, ie the majority of artefacts which today we would sand or plane such as wooden bowls and spoons, furniture parts and building timbers are left with a "tooled finish". That is to say finished with a clean cut with a sharp edge tool. A very small proportion of items including some of the fine medieval bowls called mazers have had the toolmarks removed. So far no surface analysis has been done to acertain what was used but I suspect scrapers rather than abrasives.

User avatar
chrisanson
Post Centurion
Posts: 704
Joined: Sat Apr 22, 2006 10:23 pm
Location: Dudley

Post by chrisanson »

dogfish skin( i think)

User avatar
Wilhelm
Posts: 27
Joined: Fri Jun 30, 2006 9:02 am
Location: The Prancing Pony
Contact:

Post by Wilhelm »

chrisanson wrote:dogfish skin( i think)
Yeh, i have heard that that was used almost as sand paper to smooth things down like bow staves and stuff
It is only through adversity that we learn who we really are.

User avatar
gregory23b
Absolute Wizard
Posts: 2923
Joined: Sun Jul 17, 2005 9:46 pm
Location: Gyppeswyk, Suffolk

Post by gregory23b »

There is a type of grass, shave grass used to polish woodwork, mentioned by Theophilus, in conjunction with painting or preparing wood. But that is not what you require.
middle english dictionary

Isabela on G23b "...somehow more approachable in real life"

http://medievalcolours.blogspot.com

"I know my place." Alice the Huswyf

User avatar
robin wood
Posts: 113
Joined: Mon Sep 17, 2007 5:07 pm
Location: edale, peak district
Contact:

Post by robin wood »

pretty sure theophilus' shave grass is horsetail, the same as used by grinling gibbons and japanes turners today. they use it fresh and green not dried, I am told it is equivalent to about 600 grit abrasive so just for final polishing after a cabinet scraper.

User avatar
gregory23b
Absolute Wizard
Posts: 2923
Joined: Sun Jul 17, 2005 9:46 pm
Location: Gyppeswyk, Suffolk

Post by gregory23b »

Thanks for that Robin, I had wondered if it was a hard kind of sharp grass, akin to some pampas (but European in origin), other sources seem to concur with the horsetail, somethign that grows in abundance here in Suffolk. On emore item that is easier to acquire than it first appeared.
middle english dictionary

Isabela on G23b "...somehow more approachable in real life"

http://medievalcolours.blogspot.com

"I know my place." Alice the Huswyf

User avatar
Lord High Everything Esle
Post Centurion
Posts: 652
Joined: Mon Aug 22, 2005 8:43 pm
Location: Ilkley Moor Baa't t'at
Contact:

Post by Lord High Everything Esle »

gregory23b wrote:Thanks for that Robin, I had wondered if it was a hard kind of sharp grass, akin to some pampas (but European in origin), other sources seem to concur with the horsetail, somethign that grows in abundance here in Suffolk. On emore item that is easier to acquire than it first appeared.
And it works very well indeed.

I can't see why they would not use a cabinet makers scraper. After all it is only the burred edge on a piece of metal. A curved one is very useful for taking scratches out of boxes!!

Tudor sources speak of fine English whetstones for use by barbers. "Leyland" I think.
Will/Dave, the Jolly Box Man and Barber Surgeon

"Physicians of all men are most happy; what good success soever they have, the world proclaimeth, and what faults they commit the earth coverest." Frances Quarles (1592-1644) Nicocles

User avatar
robin wood
Posts: 113
Joined: Mon Sep 17, 2007 5:07 pm
Location: edale, peak district
Contact:

Post by robin wood »

"I can't see why they would not use a cabinet makers scraper. After all it is only the burred edge on a piece of metal. A curved one is very useful for taking scratches out of boxes!! "


Nor can I, its certainly technology that was available and it works well however I could show you many hundreds of images taken close up of worked wood surfaces and virtually all have tooled finish not scraped.

User avatar
Lord High Everything Esle
Post Centurion
Posts: 652
Joined: Mon Aug 22, 2005 8:43 pm
Location: Ilkley Moor Baa't t'at
Contact:

Post by Lord High Everything Esle »

robin wood wrote:"I can't see why they would not use a cabinet makers scraper. After all it is only the burred edge on a piece of metal. A curved one is very useful for taking scratches out of boxes!! "


Nor can I, its certainly technology that was available and it works well however I could show you many hundreds of images taken close up of worked wood surfaces and virtually all have tooled finish not scraped.
Hi Robin
Thanks for clarifying that.

Are you saying there are no examples of smooth surfaces?
Will/Dave, the Jolly Box Man and Barber Surgeon

"Physicians of all men are most happy; what good success soever they have, the world proclaimeth, and what faults they commit the earth coverest." Frances Quarles (1592-1644) Nicocles

User avatar
robin wood
Posts: 113
Joined: Mon Sep 17, 2007 5:07 pm
Location: edale, peak district
Contact:

Post by robin wood »

Well I like to think of the surfaces as a different sort of smooth. A skillfuly hewn beam for instance can be as cleanly cut as a planed one, just when you look at it with the light coming from the side you can see the facets. The barber surgeons canisters from the Mary Rose are very cleanly cut but not scraped or abraded. There are very few items I have seen where toolmarks have been removed and the only ones that come to mind are mazers.

Robin

ps I love the Quarles quote, how astute just goes to show just cos folks are long dead they were not stupid.

pps You say "and it works very well indeed" I would be interested to hear how you used it, green? dry? on what and how you would compare it to modern abrasive...similar to 600 grit?

User avatar
Lord High Everything Esle
Post Centurion
Posts: 652
Joined: Mon Aug 22, 2005 8:43 pm
Location: Ilkley Moor Baa't t'at
Contact:

Post by Lord High Everything Esle »

robin wood wrote:Well I like to think of the surfaces as a different sort of smooth. A skillfuly hewn beam for instance can be as cleanly cut as a planed one, just when you look at it with the light coming from the side you can see the facets. The barber surgeons canisters from the Mary Rose are very cleanly cut but not scraped or abraded. There are very few items I have seen where toolmarks have been removed and the only ones that come to mind are mazers.
Hi Robin
Yes, I love the texture too. I suppose it depends on what the buyer was willing to pay. Utilitarian items need not be finished to the highest quality as long as they did their work efficiently.
robin wood wrote: pps You say "and it works very well indeed" I would be interested to hear how you used it, green? dry? on what and how you would compare it to modern abrasive...similar to 600 grit?
I use it dry for polishing jewellery. I have not done any experiments to measure the effectiveness though. I suppose I should but I don't make jewellery often enough.
Will/Dave, the Jolly Box Man and Barber Surgeon

"Physicians of all men are most happy; what good success soever they have, the world proclaimeth, and what faults they commit the earth coverest." Frances Quarles (1592-1644) Nicocles

User avatar
gregory23b
Absolute Wizard
Posts: 2923
Joined: Sun Jul 17, 2005 9:46 pm
Location: Gyppeswyk, Suffolk

Post by gregory23b »

We know scrapers were used to smooth gesso work, Cennini, as well as specially made tools for mouldings.
A scraper provides a straight edge to profile, loose abrasives do not, hence the difference.

User avatar
Colin Middleton
Absolute Wizard
Posts: 2037
Joined: Thu Aug 11, 2005 12:31 pm
Location: Sheffield
Contact:

Post by Colin Middleton »

When you look at the finish that can be obtained by a skilled carftsman, just by hewing and splitting, you can see why you wouldn't need a scraper. You put the extra finish onto things that you reall want SMOOTH, or where you want to show off, but for most purposes, the slight undulation of a good hewing job is problably enough.

We were at Smithhills Hall on Bolton a few years back and they were telling us that some of the boards had been replaced. All the visitors thought that the new boards were the originals, because the original boards were so wel finished!
Colin

"May 'Blood, blood, blood' be your motto!"

Image

User avatar
Mad Monk of Mitcham
Posts: 54
Joined: Thu Jul 28, 2005 11:36 pm
Location: Mitcham
Contact:

Post by Mad Monk of Mitcham »

Shavegrass (and bamboo) have a type of opal (the gemstone) in their fibres.

This is what you get the abrasive action from.

Traditionally in Burma and China, Jade was polished against bamboo.

User avatar
Jim
Posts: 427
Joined: Mon Aug 22, 2005 11:30 am
Location: Basingstoke, Hants
Contact:

Post by Jim »

Well I reckon Emperor Sigismund was pretty bloody abrasive, if you ask me.



*gives a high five*
www.cybalism.org - The new view of the Universal Truth

User avatar
sally
Post Knight
Posts: 1806
Joined: Mon Jul 18, 2005 2:31 pm
Location: Sunny Wales
Contact:

Post by sally »

I've used horsetail on both wood and metal with good effect, the rough green parts of madder are also surprisingly effective for scouring rust off things. I ave a feeling I've seen a reference to this in connction with armour, but sadly have absolutely no idea where, or whether its period or modern in context.

Gockee
Posts: 19
Joined: Fri Jun 22, 2007 4:06 pm
Location: Dorset

Post by Gockee »

I have heard of brick dust being used as an abrasive so tried it myself.

I tried some old brick bits ground up to a fine dust and mixed with (olive?) oil. When applied with a cloth it behaved like fine emery cloth. It worked very well at clearing up rust on knives left unused over winter.

Maybe this is like the 'rotten stone'?

Post Reply